Angle Bead

Angle bead is a vertical molding used to protect the external angle of the intersecting surfaces. A strip of formed galvanized iron, sometimes combined with a strip of metal lath, placed on corners to reinforce them before plastering. And it's provides a straight edge to help the formation of joints, corners and abutment in plaster work, which resist chipping and cracking.

Specification

Wing width

Length

45 mm

3 m

50 mm

3 m

70 mm

3 m

75 mm

3 m

*Special types and sizes are available on request.

Brick mesh
It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.The application gives brickwork increased resistance to tensional stresses. The brickwork reinforcement (coil mesh) assists resistance to tensile stresses where settlement occurs. Easily incorporated into mortar course, coiled for ease of handing.

Specification

Wing width

Length

Weight (Kg/M2)

50 mm

50 m

0.700

75 mm

50 m

0.700

100 mm

50 m

0.700

150 mm

 50 m

0.700

175 mm

50 m

0.700

200 mm

50 m

0.700

 

 

 

All rights are reserved by www.alkawtherqatar.com
Developed and published by www.zillioninfosolutions.com